LABRACE M40 MOTORBIKE TEST BENCHES banco prova moto - easyrun banco prova moto - easyrun banco prova moto - easyrun banco prova moto - easyrun LABRACE M80 MOTORBIKE TEST BENCHES banco prova moto - easyrun banco prova moto - easyrun banco prova moto - easyrun banco prova moto - easyrun banco prova moto - easyrun

MOTORBIKE POWER TEST BENCHES

LabRACE is the line of motorbike power test benches conceived, designed, produced and sold by EASYRUN to meet the needs of professionals, repairers, but also those with hobbies of motorbikes and engines.

Designed and built with the highest safety and quality standards, regarding both mechanical and software operability, they guarantee ease of use and completeness of functionality obtained over the years thanks to constant updates based on new technologies, and requests from mechanical tuners who use it every day.

LabRACE M40

Patented Design

LabRACE M40 is the latest 2020 innovation among our motorbike power test benches. Inertial and innovative in design, the bench is portable, designed specifically for those working with mini-motorbikes and racing scooters.

Precision measurements combine with a compact, lightweight and strong structure with removable foot pedals that facilitate its transport in race environments and installation in workshops with limited operating spaces.

The equivalent inertia of the roller allows repeated and consecutive tests to be carried out on mini-motorbikes and scooters being elaborated, guaranteeing high precision and repeatability of measurements identical to higher-end models.

LabRACE M40 mechanical systems

  • Knurled inertial roller
  • Roller balancing at 6000 rpm
  • Bearings for high speeds
  • Loading ramp and wheel locking
  • Prepared for engine test module
  • High structural rigidity
  • Powder-based painting

LabRACE M40 technical data

  • Measured power 40Cv and higher
  • Maximum speed 280 Km/h
  • Min. wheel base 550 mm
  • Max. wheel base 1500 mm
  • Min. wheel diameter 60mm
  • Electrical power supply for PC 220vac

LabRACE M40 WORKSHOP

banco scooter minimoto M40 easyrun

LabRACE M80/M150/M235

Patented Design

The LabRACE M80/M150/M235 line of inertial motorbike power test benches was also subject to new styling in 2020.

Updated both in functions and in design to meet the new needs of tuning professionals and enthusiasts who need to check the performance of their motorbikes before and after mechanical and software interventions on maps.

Optimized with regards to size, they are particularly suitable for installation in small soundproof rooms as well as in workshops with limited space.

Their really modern look means that they can also be positioned in well visible places to become a point of attraction for your customers, giving them the feeling of being in a professional, modern environment with cutting-edge services.

LabRACE M80/M150/M235 mechanical systems

  • Knurled inertial roller
  • Roller balancing at 6000 rpm
  • Bearings for high speeds
  • End-of-test pneumatic brake
  • Loading ramp and wheel locking
  • Prepared for engine test module
  • High structural rigidity
  • Powder-based painting

LabRACE M80/M150/M235 technical data

  • Measured power 80Cv/150Cv/235Cv and higher
  • Maximum speed 320 Km/h
  • Min. wheel base 800mm
  • Max. wheel base 2100mm
  • Min. wheel diameter 60mm
  • Electrical power supply for PC 220Vac

LabRACE M80/M150/M235 In Ground Model

banco moto interrato easyrun

LabRACE M300B/M300J – BRAKED/INERTIAL ACTION

Patented Design

LabRACE M300 is the line of braked and inertial test benches, convertible into braking benches, produced since 2001.

This line is dedicated to those who mainly work on large-displacement and competition bikes.

The LabRACE M300 inertial line is, today, a high-power motorcycle bench featuring the greatest inertial load – more expensive but with the benefit of accuracy and repeatability of measurements. It has, in fact, the ability of an inertial bench to make the discontinuities of the power curve of a vehicle stand out, linked to the speed and accuracy of the acquisition of its electronics, but also to the inertia of the bench itself.

LabRACE M300 mechanical systems

  • Knurled inertial roller
  • Roller balancing at 6000 rpm
  • Bearings for high speeds
  • End-of-test pneumatic brake
  • Loading ramp and wheel locking
  • Prepared for engine test module
  • High structural rigidity
  • Powder-based painting
  • Can be upgraded to brake bench

LabRACE M300 technical data

  • Measured power 300Cv and higher
  • Maximum speed 320 Km/h
  • Min. wheel base 800mm
  • Max. wheel base 2100mm
  • Min. wheel diameter 60mm
  • Electrical power supply for PC 220vac
  • Pneumatic supply 7bar

STANDARD AND OPTIONAL EQUIPMENT FOR MOTORBIKE TEST BENCHES

Standard equipment

  • Latest version software
  • Electronics data acquisition via USB port
  • Mechanical wheel lock
  • Tracks with torsion system
  • Safety barriers
  • Assistance

Specific accessories for motorbike benches

  • Pneumatic wheel lock clamp
  • Light cooling fan
  • Cooling fan performer
  • High power variable speed air-box fan
  • Fume extractor
  • Linear lambda probe
  • Additional temperature and pressure sensors
  • Remote control (working range up to 10m from the PC)
  • Weather station
  • Preconfigured laptop
  • Computer trolley
  • Customization

      

LABRACE MOTORBIKE TEST BENCH MECHANICAL SYSTEM

The frame is made of high-strength die-cast steel, laser cut and joined by MIG welding. After sandblasting, the frame undergoes a final double-layer powder coating.

The roller is made of C40 steel by means of numerically controlled internal and external precision turning and pin-knurled. After having been balanced, it is then painted with a triple layer of two-component epoxy paint to ensure its integrity over time.

The mechanic systems have also been designed to be multifunctional. In fact, EASYRUN motorbike test benches are the only ones that allow you to test engines alone or motorbikes with direct connection between roller and transmission chain, thanks to the practical rear opening that allows access to the axis of the roller.

These inertial motorbike benches are also equipped with pneumatically operated safety brake and end test. The brake is used to slow down the roller at the end of the test, as well as to lock it when the vehicle to be tested is raised or lowered. In fact, the pneumatic pedal can be used as a normal automotive brake pedal (pressing less makes the roller slow down) or fixed in position (pressing completely locks the roller), while with a second movement it can be unlocked and returned to its original function. Moreover, the pedal is fixed magnetically to the platform and can be positioned on the bench as desired.

The suitably compact design of the LABRACE M80/M150/M235 benches allows to create real motorbike test laboratories, even in smaller environments, simplifying installation in soundproof rooms with reduced dimensions and costs.

New and innovative in design and functionality, the LABRACE M40 stands out for its professional performance and small size, making it easy to transport in race environments.

banco moto M300 - easyrun

banco scooter M80 - easyrun

banco prova moto easyrun

cabina labrace - easyrun

DISCOVER MORE